CT meter installation: what is involved and what it costs
A CT meter (current transformer meter) is used where a supply is too big for a standard whole-current meter, usually above 100 amps. Instead of the full current passing through the meter, current transformers on each phase send a small, proportional signal to it.
Who does what
- Your electrician gets the site ready: meter tails, a main switch and, where needed, a CT chamber or panel.
- The meter operator appointed through your supplier fits the CTs and meter, sets the CT ratio and connects the communications.
- The network operator (DNO) is involved only if the cut-out or service cable needs work.
What it costs
A straightforward CT meter changeover is usually a few hundred pounds. A new CT installation with commissioning costs more, and a whole-current to CT upgrade that needs a CT chamber and electrical works can run into thousands. Supply size, access, out-of-hours working and whether power can be switched off all affect the price.
Commissioning
CT metering is not finished until it has been commissioned: the CT ratio, wiring and phase rotation are checked under load and recorded. Without that, bills can be wrong by a large factor.